Compatible Fasteners:

SN3490 - 33°/34° Paper Tape Framing Nailer

The B&C Eagle SN3490 paper tape framing nail gun features a lightweight aluminum housing without compromising the power needed to drive between a 2” to a 3-1/2” framing nail. With a soft rubber grip, the tool offers comfort and stability without fatigue. The built-in trigger selection allows you to choose quickly and easily between single fire and bump fire nailing. The SN3490 has a convenient rear load magazine to replenish quickly to avoid loss of time. Other convenient features include a tool free depth of drive, connected rafter hook and a no-mar tip. A 360 degree directional cap gives you the freedom to direct the flow of the exhaust away from your face while working. This framing nail gun is also equipped with a built in air filter to trap dirt from the inside of the tool keeping it clean during use and then expelling some if the debris once it is unplugged from the air source. The low nail lock out feature indicates when re-loading is required without the added tool wear and wasted time of dry firing. All of these items combined make the SN3490 the ideal tool to accomplish all of your framing needs.

Product Features

Compatible with 30° to 34° paper tape collated framing nails

Rear load magazine

Built in air filter

Comfortable rubber grip

Selectable trigger sequential to contact trip actuation

Tool free adjustable depth of drive

Stowable rafter hook

Lightweight aluminum housing

Toe nail safety

Adjustable exhaust deflector (tool free 360°)

Low nail lock-out prevents dry fire

CLICK HERE FOR COMPATIBLE FASTENERS

Compatible Fasteners:

SN3483 - 33°/34° Paper Tape Nailer

The B&C Eagle SN3483 paper tape framing nail gun features a lightweight aluminum housing without compromising the power needed to drive between a 2” to a 3-1/2” framing nail. With a soft rubber grip, the tool offers comfort and stability without fatigue. The SN3483 has a convenient rear load magazine to replenish quickly to avoid loss of time. This framing nail gun is also equipped with a built in air filter to trap dirt from the inside of the tool keeping it clean during use and then expelling some if the debris once it is unplugged from the air source. Other convenient features include a connected rafter hook and no-mar tip. The low nail lock out feature indicates when re-loading is required without the added tool wear and wasted time of dry firing. All of these items combined make the SN3483 the ideal tool to accomplish all of your framing needs.

Product Features

Compatible with 30° to 34° paper tape collated framing nails

Rear load magazine

Built in air filter

Comfortable rubber grip

Stowable rafter hook

Lightweight aluminum housing

Low nail lock-out prevents dry fire

CLICK HERE FOR COMPATIBLE FASTENERS

Compatible Fasteners:

MC150 - 33°/34° Degree Joist Hanger Nailer

The B&C Eagle MC150 joist hanger nail gun is an ideal tool for nailing various metal connectors. This tool uses the exposed nail tip placed directly into the hole of the connector for a quick and accurate application. The MC150 uses a 1-1/2” paper tape collated joist hanger nail that is especially hardened to ensure safe firing through the connector even if the hole was missed. The lightweight compact design and soft rubber grip allows you to attach connectors into narrow openings without risking fatigue from hand nailing. The MC150 has a convenient rear load magazine to replenish quickly to avoid loss of time. The low nail lock out feature indicates when re-loading is required without the added tool wear and wasted time of dry firing.

Product Features

Comfortable rubber grip

Rear load magazine

Lightweight magnesium housing

Exposed nail tip for easy placement

Compact lightweight design reduces fatigue

Low nail lock-out prevents dry fire

CLICK HERE FOR COMPATIBLE FASTENERS

Compatible Fasteners:

SN2290 - 22° Full Round Head Plastic Strip Nailer (DISCONTINUED)

The B&C Eagle SN2290 round head plastic strip framing nail gun features a lightweight aluminum housing without compromising the power needed to drive between a 2” to a 3-1/2” framing nail. With a soft rubber grip, the tool offers comfort and stability without fatigue. The built-in trigger selection allows you to choose quickly and easily between single fire and bump fire nailing. The SN2290 has a convenient rear load magazine to replenish quickly to avoid loss of time. A 360 degree directional cap gives you the freedom to direct the flow of the exhaust away from your face while working. This framing nail gun is also equipped with a built in air filter to trap dirt from the inside of the tool keeping it clean during use and then expelling some if the debris once it is unplugged from the air source. Other convenient features include a tool free depth of drive, connected rafter hook, and no-mar tip. The low nail lock out feature indicates when re-loading is required without the added tool wear and wasted time of dry firing. All of these items combined make the SN2290 the ideal tool to accomplish all of your framing needs.

Product Features

Rear load magazine

Built in air filter

Comfortable rubber grip

Selectable trigger sequential to contact trip actuation

Tool free adjustable depth of drive

Stowable rafter hook

Lightweight magnesium housing

Toe nail safety with removable No-Mar tip

Adjustable exhaust deflector (tool free 360°)

Low nail lock-out prevents dry fire

CLICK HERE FOR COMPATIBLE FASTENERS

Compatible Fasteners:

SN22/83H - 22° Full Round Head Plastic Strip Nailer

The B&C Eagle SN22/83H round head plastic strip framing nail gun features a lightweight aluminum housing without compromising the power needed to drive between a 2” to a 3-1/2” framing nail. With a soft rubber grip, the tool offers comfort and stability without fatigue. The SN22/83H has a convenient rear load magazine to replenish quickly to avoid loss of time. This framing nail gun is also equipped with a built in air filter to trap dirt from the inside of the tool keeping it clean during use and then expelling some if the debris once it is unplugged from the air source. Other convenient features include a connected rafter hook and no mar tip. The low nail lock out feature indicates when re-loading is required without the added tool wear and wasted time of dry firing. All of these items combined make the SN22/83H the ideal tool to accomplish all of your framing needs.

Product Features

Rear load magazine

Built in air filter

Comfortable rubber grip

Stowable rafter hook

Lightweight magnesium housing

Toe nail safety with removable No-Mar tip

Low nail lock-out prevents dry fire

CLICK HERE FOR COMPATIBLE FASTENERS

SN22160 - 22° Full Round Head Plastic Strip Timber Nailer

The B&C Eagle SN22160 round head plastic strip timber nailer features a lightweight aluminum housing without compromising the power needed to drive between a 4” to a 6-1/4” framing nail. With a soft rubber grip, the tool offers comfort and stability without fatigue. The SN22160 has a convenient high capacity top load magazine to replenish quickly. This framing nail gun is also equipped with a built in air filter to trap dirt from the inside of the tool keeping it clean during use and then expelling some of the debris once it is unplugged from the air source. The low nail lock out feature indicates when re-loading is required without the added tool wear and wasted time of dry firing.

Product Features

Compatible with 20° to 22° plastic collation framing nails 4" to 6-1/4" length

High capacity top load magazine

Lightweight magnesium housing

Ergonomic rubber grip handle

Tool free adjustable depth of drive

Detachable side lever

Front downward facing exhaust keeps dust away from user

Built in air filter

CLICK HERE FOR COMPATIBLE FASTENERS

Compatible Fasteners:

SN2890 - 28° Wire Weld Framing Nailer (DISCONTINUED)

The B&C Eagle SN2890 wire weld framing nail gun features a lightweight aluminum housing without compromising the power needed to drive between a 2" to a 3-1/2" framing nail. With a soft rubber grip, the tool offers comfort and stability without fatigue. The built-in trigger selection allows you to choose quickly and easily between single fire and bump fire nailing. The SN2890 has a convenient rear load magazine to replenish quickly to avoid loss of time. Other convenient features include a tool free depth of drive, connected rafter hook and a no-mar tip. A 360 degree directional cap gives you the freedom to direct the flow of the exhaust away from your face while working. This framing nail gun is also equipped with a built in air filter to trap dirt from the inside of the tool keeping it clean during use and then expelling some if the debris once it is unplugged from the air source. The low nail lock out feature indicates when re-loading is required without the added tool wear and wasted time of dry firing. All of these items combined make the SN2890 the ideal tool to accomplish all of your framing needs.

Product Features

Compatible with 28° wire weld collated framing nails

Rear load magazine

Built in air filter

Comfortable rubber grip

Selectable trigger sequential to contact trip actuation

Tool free adjustable depth of drive

Stowable rafter hook

Lightweight aluminum housing

Toe nail safety

Adjustable exhaust deflector (tool free 360°)

Low nail lock-out prevents dry fire

CLICK HERE FOR COMPATIBLE FASTENERS

Compatible Fasteners:

MS1650 - 7/16" Medium Crown 16ga Stapler

The B&C Eagle MS1650 is a 7/16-inch standard crown 16 gauge stapler. It features a lightweight housing, aluminum magazine, and soft rubber grip for comfort and durability for most construction needs. The front of the tool includes a quick opening latch allowing you to clear jammed staples quickly and safely. A 360 degree directional cap gives you the freedom to direct the flow of the exhaust away from your face while working. The MS1650 has a magazine capacity of 140 staples and can use staples ranging in length from ¾-inch to 2 inches.

Product Features

Comfortable rubber grip

Adjustable exhaust deflector (tool free 360°)

Top loading magazine

Quick clear nose latch

Dust Cover for air inlet

Hard anodized aluminum magazine for long term durability

Lightweight magnesium housing

CLICK HERE FOR COMPATIBLE FASTENERS

Compatible Fasteners:

MS1650P - 16GA Medium 1/2” Crown Stapler

The B&C Eagle MS1650P is a 1/2-inch paslode style standard crown 16 gauge stapler. It features a lightweight housing, aluminum magazine, and soft rubber grip for comfort and durability for most construction needs. The front of the tool includes a quick opening latch allowing you to clear jammed staples quickly and safely. A 360 degree directional cap gives you the freedom to direct the flow of the exhaust away from your face while working. The MS1650P has a magazine capacity of 140 staples and can use staples ranging in length from ¾-inch to 2 inches.

Product Features

Comfortable rubber grip

Adjustable exhaust deflector (tool free 360°)

Top loading magazine

Quick clear nose latch

Dust Cover for air inlet

Hard anodized aluminum magazine for long term durability

Lightweight magnesium housing

CLICK HERE FOR COMPATIBLE FASTENERS

Compatible Fasteners:

CN45R - Coil Roofing Nailer

The B&C Eagle CN45R coil roofing nailer has a light and rugged housing with a soft rubber grip designed to meet the needs of any job in any climate. The magazine has a capacity to hold up to 120 nails in lengths ranging from ¾-inch to 1-3/4-inches. The built-in trigger selection allows you to choose quickly and easily between single fire and bump fire nailing. A 360 degree directional cap gives you the freedom to direct the flow of the exhaust away from your face while working. This roofing nail gun is also equipped with a built in air filter to trap dirt from the inside of the tool keeping it clean during use and then expelling some if the debris once it is unplugged from the air source. Other convenient features include a tool free depth of drive, anti-skid housing pads and adjustable shingle guide. The patented spring loaded nail guide assures the user of safely nailing every nail straight down to the last nail in the coil.

Product Features

Built in air filter

Comfortable rubber grip

Tool free adjustable depth of drive

Selectable trigger sequential to contact trip actuation

Patented nail guide assures straight fastener driving

Carbide tip saftey contact for long term durability

Adjustable exhaust deflector (tool free 360°)

Adjustable shingle guide

Anti-skid pads for casting wear protection

Open nose for easy jam clearing

Lightweight magnesium housing

Tough nylon magazine

Dust Cover for air inlet

CLICK HERE FOR COMPATIBLE FASTENERS

Compatible Fasteners:

CN65SP - 15° Coil Siding Nailer

The B&C Eagle CN65SP Coil siding nailer has a light and rugged housing with a soft rubber grip designed to meet the needs of any job in any climate. This tool is compatible with wire collated and plastic collated coil nails. The magazine has a capacity to hold up to 400 wire collated coil nails or up to 200 plastic band collated nails in lengths ranging from 1-1/4-inches to 2-1/2-inches. A 360 degree directional cap gives you the freedom to direct the flow of the exhaust away from your face while working. The built-in trigger selection allows you to choose quickly and easily between single fire and bump fire nailing. Other convenient features include a tool free depth of drive, belt hook, and no-mar tip to avoid dents on the wood surface.

Product Features

Tool free adjustable depth of drive

Selectable trigger sequential to contact trip actuation

Comfortable rubber grip

No-Mar tip

Belt Hook

Adjustable exhaust deflector (tool free 360°)

Open nose for easy jam clearing

Lightweight magnesium housing

Dust Cover for air inlet

CLICK HERE FOR COMPATIBLE FASTENERS

CN75 - 15° Coil Siding / Framing Nailer

The B&C Eagle CN75 coil siding / framing nailer features a lightweight magnesium housing, soft rubber grip, adjustable exhaust deflector, easy load magazine, tool free adjustable depth of drive and selectable bump fire & sequential fire modes. It's lightweight offers comfort and stability without fatigue. This coil nailer is also equipped with a built in air filter to trap dirt from the inside of the tool keeping it clean during use and then expelling some of the debris once it is unplugged from the air source.

Product Features

Compatible with 15° coil framing nails 1-3/4" to 3" length

Tool free adjustable depth of drive

Selectable Bump Fire & Sequential Fire Mode

Contoured rubber comfort grip handle

No mar tip

Adjustable exhaust deflector (tool free 360°)

Easy loading magazine

Lightweight magnesium housing

CLICK HERE FOR COMPATIBLE FASTENERS

CN90F - 15° Coil Framing Nailer

The B&C Eagle CN90F coil framing nailer features a lightweight magnesium housing, soft rubber grip, adjustable exhaust deflector, easy load magazine, tool free adjustable depth of drive and selectable bump fire & sequential fire modes. It's lightweight offers comfort and stability without fatigue. This coil nailer is also equipped with a built in air filter to trap dirt from the inside of the tool keeping it clean during use and then expelling some of the debris once it is unplugged from the air source.

Product Features

Compatible with 15° coil framing nails 1-3/4" to 3-1/2" length

Tool free adjustable depth of drive

Selectable Bump Fire & Sequential Fire Mode

Contoured rubber comfort grip handle

Aggressive toe nailing bracket

Adjustable exhaust deflector (tool free 360°)

Easy loading magazine

Lightweight magnesium housing

Belt hook

CLICK HERE FOR COMPATIBLE FASTENERS

Compatible Fasteners:

BN1855 - 18GA. Brad Nailer

The B&C Eagle BN1855 18 gauge brad nailer is a lightweight tool designed for small carpentry work. The light weight housing and soft rubber grip offers stability and less fatigue. The oil free operation prevents oil staining on woodwork. The BN1855 has a large capacity magazine capable of holding up to 100 nails with a range in length between 5/8-inch and 2-inches. A convenient fastener sight gauge allows you to see how many nails are in the tool to prevent dry firing. A 360 degree directional cap gives you the freedom to direct the flow of the exhaust away from your face while working. This tool also has a convenient tool free adjustable depth of drive. The built-in trigger selection allows you to choose quickly and easily between single fire and bump fire nailing. The front of the tool includes a quick opening latch allowing you to clear jammed nails quickly and safely. Accessories include a plastic carrying case and belt hook.

Product Features

Rugged plastic carry case

Oil-Less operation

Tool free adjustable depth of drive

Selectable trigger sequential to contact trip actuation

Fastener sight gauge on magazine

Comfortable rubber grip

Rear exhaust with built in muffler

Belt hook

Quick clear nose for easy jam clearing

Lightweight aluminum housing

Dust Cover for air inlet

CLICK HERE FOR COMPATIBLE FASTENERS

Compatible Fasteners:

FN1664 - 16GA. Straight Finish Nailer

The B&C Eagle FN1664 16 gauge straight finish nailer is designed to meet the needs of any finish or trim project. Nail compatibility for the FN1664 ranges from ¾-inch to 2-1/2-inches. This tool features a lightweight housing with a comfortable rubber grip to maintain comfort and stability. The front of the tool includes a quick opening latch allowing you to clear jammed nails quickly and safely. A 360 degree directional cap gives you the freedom to direct the flow of the exhaust away from your face while working. The FN1664 also has a convenient tool free adjustable depth of drive. The built-in trigger selection allows you to choose quickly and easily between single fire and bump fire nailing. Accessories include a plastic carrying case, no-mar tip and belt hook.

Product Features

Rugged plastic carry case

Comfortable rubber grip

Tool free adjustable depth of drive

Selectable trigger sequential to contact trip actuation

No-Mar tip

Adjustable exhaust deflector (tool free 360°)

Belt hook

Quick clear nose for easy jam clearing

Lightweight aluminum housing

Rear load magazine

Dust Cover for air inlet

CLICK HERE FOR COMPATIBLE FASTENERS

Compatible Fasteners:

FN1564 - 15GA. Angled Finish Nailer

The B&C Eagle FN1564 15 gauge angle finish nailer is designed to meet the needs of any finish or trim project. Nail compatibility for the FN1564 ranges from 1-inch to 2-1/2-inches. This tool features a lightweight housing with a soft rubber grip to maintain comfort and stability. The front of the tool includes a quick opening latch allowing you to clear jammed nails quickly and safely. A 360 degree directional cap gives you the freedom to direct the flow of the exhaust away from your face while working. The FN1564 also has a convenient tool free adjustable depth of drive. The built-in trigger selection allows you to choose quickly and easily between single fire and bump fire nailing. Accessories include a plastic carrying case, no-mar tip and belt hook.

Product Features

Rugged plastic carry case

Comfortable rubber grip

Tool free adjustable depth of drive

Selectable trigger sequential to contact trip actuation

No-Mar tip

Belt hook

Adjustable exhaust deflector (tool free 360°)

Quick clear nose for easy jam clearing

Lightweight magnesium housing

Rear load magazine

Dust Cover for air inlet

CLICK HERE FOR COMPATIBLE FASTENERS

Compatible Fasteners:

NS1840-II - 18GA. Finish Stapler

The B&C Eagle NS1840-II 18 gauge narrow crown finish stapler is an ideal tool for both interior and exterior finish and trim projects as well as furniture and cabinet work. Staple compatibility for the NS1840-II ranges from 1/2-inch to 1-1/2-inches in length with a ¼-inch crown. The oil free operation prevents oil staining on woodwork. This tool features a lightweight housing with a comfortable rubber grip to maintain comfort and stability. A 360 degree directional cap gives you the freedom to direct the flow of the exhaust away from your face while working. The NS1840-II also has a convenient tool free adjustable depth of drive. The built-in trigger selection allows you to choose quickly and easily between single fire and bump fire nailing. Accessories include a plastic carrying case and belt hook.

Product Features

Rugged plastic carry case

Oil-Less operation

Tool free adjustable depth of drive

Selectable trigger sequential to contact trip actuation

Fastener sight gauge on magazine

Comfortable rubber grip

Rear exhaust with built in muffler

Belt hook

Quick clear magazine for easy jam clearing

Lightweight aluminum housing

Dust Cover for air inlet

CLICK HERE FOR COMPATIBLE FASTENERS

US1116LMA - 1/4" to 9/16" A11/T50 Series Fine Wire Stapler

The B&C Eagle US1116LMA is a long mag auto fire A11/T50 series stapler. It shoots 1/4" to 9/16", 3/8" Crown staples (B&C Eagle A-11 Series). With a soft rubber grip, the tool offers comfort and stability without fatigue. The US1116LMA has a bottom loading magazine for quick and effortless reloads.

Product Features

Compatible with 1/4" to 9/16" A11/T50 Series fine wire staples, (3/8" Crown)

Lightweight aluminum housing

Bottom load magazine

Rear facing exhaust

Comfortable rubber grip

Adjustable fire rate

CLICK HERE FOR COMPATIBLE FASTENERS

US5016LMA - 1/4" to 9/16" 5000 Series Fine Wire Stapler

The B&C Eagle US5016LMA is a long mag auto fire 5000 series stapler. It shoots 1/4" to 9/16", 1/2" Crown staples (B&C Eagle 5000 Series). With a soft rubber grip, the tool offers comfort and stability without fatigue. The US5016LMA has a bottom loading magazine for quick and effortless reloads.

Product Features

Compatible with 1/4" to 9/16" 5000 Series fine wire staples, (1/2" Crown)

Lightweight aluminum housing

Bottom load magazine

Rear facing exhaust

Comfortable rubber grip

Adjustable fire rate

CLICK HERE FOR COMPATIBLE FASTENERS

US7116LMA - 1/4" to 5/8" 71 Series Fine Wire Stapler

The B&C Eagle US7116LMA is a long mag auto fire 71 series stapler. It shoots 1/4" to 5/8" 22 Gauge, 3/8" Crown staples (B&C Eagle 71 Series). With a soft rubber grip, the tool offers comfort and stability without fatigue. The US7116LMA has a bottom loading magazine for quick and effortless reloads.

Product Features

Compatible with 1/4" to 5/8" 71 Series fine wire staples (3/8" Crown)

Lightweight aluminum housing

Bottom load magazine

Rear facing exhaust

Comfortable rubber grip

Adjustable fire rate

CLICK HERE FOR COMPATIBLE FASTENERS

US8016LMA - 1/4" to 5/8" 80 Series Fine Wire Stapler

The B&C Eagle US8016LMA is a long mag auto fire 80 series stapler. It shoots 1/4" to 5/8" 22 Gauge, 1/2" Crown staples (B&C Eagle 80 Series). With a soft rubber grip, the tool offers comfort and stability without fatigue. The US8016LMA has a bottom loading magazine for quick and effortless reloads.

Product Features

Compatible with 1/4" to 5/8" 80 Series fine wire staples, (1/2" Crown)

Lightweight aluminum housing

Bottom load magazine

Rear facing exhaust

Comfortable rubber grip

Adjustable fire rate

CLICK HERE FOR COMPATIBLE FASTENERS

HP2335 - 5/8" to 1-3/8" 23 Gauge Headless Pinner

The B&C Eagle HP2335 is 23 gauge headless pinner. It shoots 5/8" to 1-3/8" 23 Gauge headless pins (B&C Eagle B23 Series). With a soft rubber grip, the tool offers comfort and stability without fatigue. The HP2335 has a side loading magazine for quick and effortless reloads.

Product Features

Works with 23 gauge pins 5/8" to 1-3/8"

Side load magazine

No mar tip

Built in air filter

Comfortable rubber grip

Lightweight aluminum housing

CLICK HERE FOR COMPATIBLE FASTENERS